ARTiPLAQ™

ARTiPLAQ™ plaque mounting is an affordable alternative to custom picture framing for your photos, posters, prints and more. No glare. No glass. It is proteched against UV, and ready to hang on the wall. Your print is permanently bonded so it will not buckle, wrinkle or fade with time.

1) The Plaq Mount is our standard offering: your print mounted to a solid 3/8" thick board, the edge finished with either a standard, heavy or micro bevel with your choice of colors. Edge profiles are shown below.

2) The Float Mount is similar to the flush mount style, but the hollow frame fixed to the back is inset a few inches from the edge so when the plaq is hung on the wall the frame is not visible. As with the flush mount, your print is mounted to 1/8" masonite, the edge is finished in your choice of colors. The Float mount profile looks like this:

3) The Flush Mount is a thicker, 7/8 inch profile plaq. Your print is mounted to a 1/8" masonite and then a frame is fixed to the back side flush to the edge. The finished 'flush mount' is less than half the weight of a standard plaq of similar dimensions. This is the style of choice for larger pieces or for a more substantial appearance. A flush mount edge profile looks like this:

Listed below are some of our most polular sizes, and their corresponding prices. ARTiPLAQ is available in any size from 4" to 60". If you would like pricing information on custom sizes, please contact us.

Size	Plaq Mount	Float or Flush Mount
8x10	20.00	40.00
8x12	23.00	43.00
11x14	27.00	47.00
16x20	43.00	69.00
16x24	50.00	78.00
20x24	65.00	96.00
20x30	80.00	113.00
24x30	106.00	160.00
24x36	125.00	187.00
30x40	150.00	220.00